EUR

TrainOMatic Lokommander 2 Mini

Show all Decoders

€25,-

Product description

Train-O-Matic Lokommander 2 decoders are pretty complete decoders, as you will see from the list of features. Even though they are tiny in size, they pack all the features you would expect from a premium decoder.

The Lokommander 2 mini decoder, best suited for track H0 and TT, is available in the following variants:

NEM 651 wired with 6 wires (W6P)
19.5 x 11 x 3.3mm
4x AUX (1 wire, 3 soldering pads, SUSI via Soldering pads)
NEM 652 (9 wires and 8 pin plug (W8P)
19.5 x 11 x 3.3mm
4x AUX (1 wire, 3 soldering pads, SUSI via Soldering pads)
PluX12 (P12)
19.5 x 11 x 3.3mm
6 x AUX (of which 2 for SUSI and SUSI via Solder pads)
PluX16 (P16)
19.5 x 11 x 3.3mm
6 x AUX (of which 2 for SUSI and SUSI via Solder pads)
MTC21 (M21)
20 x 15.3 x 5mm
6 x AUX (of which 2 for SUSI and SUSI via Solder pads)
MTC21 + Susi Connector (M21S)
20 x 15.3 x 5mm
10 x AUX (of which 2 for SUSI and SUSI via Solder pads)
PluX22 (P22)
20 x 15.3 x 5mm
10 x AUX (of which 2 for SUSI and SUSI via Solder pads)
NEM 652 Wired
20 x 15.3 x 5mm
10 x AUX (of which 2 for SUSI and SUSHI via Solder pads)

Lokommander 2 Decoder Serie

NMRA compliant DCC locomotive decoder
Short (1-127) and long (128-9999) configurable addresses
14, 28/128 speed steps
Maximum motor current 1000mA
Load compensation and BEMF
Speed set at 3 points (Vmin, Vmid, Vmax) or in tabular form
Shunting speed
Constant distance braking, activated on ABC/DC sector or at zero speed
Reduced speed drive on ABC Slow Speed section
Penduling function (Push-Pull) without or with intermediar stop
Up to 10 dimmable auxiliary outputs
Function output maximum 200 mA per output, maximum of all outputs 400mA
Output Mapping to functions F0, F1-F12
Short-circuit and over-current protection of motor and auxiliary outputs
Bidirectional communication RAILCOM
SUSI© and LocoWire© interface
Outputs for Smart Power Pack (SPP ©)
Electromagnetic uncoupler drive capability
Upgradable software via the programmer, even with the decoder mounted in the locomotive
Usable in H0, TT and N scale models
Supply voltage 4-24V
Ability to set different speeds for forward and reverse