EUR

Lokommander 2 Micro

Show all Decoders

€24,50

Product description

Train-O-Matic Lokommander 2 decoders are pretty complete decoders, as you will see from the list of features. Even though they are tiny in size, they pack all the features you would expect from a premium decoder.

The Lokommander 2 micro decoder, best suited for track N, is available in the following variants:

NEM 651 wired with 7 wires (W) 14 x 9 x 3.3mm
NEM 651 (6 straight pins) (6P) 14 x 9 x 3.3mm
NEM 651 (6 angled pins) (6P90) 14 x 9 x 3.3mm
NEM 651 (7 wires + 6 pin plug) (W6P) 14 x 9 x 3.3mm
Next18 14.2 x 9.2 x 3mm

Lokommander 2 Decoder Serie

NMRA compliant DCC locomotive decoder
Short (1-127) and long (128-9999) configurable addresses
14, 28/128 speed steps
Maximum motor current 1000mA
Load compensation and BEMF
Speed set at 3 points (Vmin, Vmid, Vmax) or in tabular form
Shunting speed
Constant distance braking, activated on ABC/DC sector or at zero speed
Reduced speed drive on ABC Slow Speed section
Penduling function (Push-Pull) without or with intermediar stop
Up to 10 dimmable auxiliary outputs
Function output maximum 200 mA per output, maximum of all outputs 400mA
Output Mapping to functions F0, F1-F12
Short-circuit and over-current protection of motor and auxiliary outputs
Bidirectional communication RAILCOM
SUSI© and LocoWire© interface
Outputs for Smart Power Pack (SPP ©)
Electromagnetic uncoupler drive capability
Upgradable software via the programmer, even with the decoder mounted in the locomotive
Usable in H0, TT and N scale models
Supply voltage 4-24V
Ability to set different speeds for forward and reverse