Makkelijk te verwerken.
Your cart is currently empty
The new Micro function decoder by Train-O-Matic, is a welcome addition to the Lokommander II decoder line-up.
The new Micro function decoder by Train-O-Matic, is a welcome addition to the Lokommander II decoder line-up. Its small size of 13 x 9.3 mm and 6 pin connection, make it suitable for many small coaches. If your model is factory fitted with a 6 pin connection (NEM 651), you can plug the 6 pin version straight in. But the new Micro function decoder is available in different versions, among others Next18 and a wired version to add digital options to any coach of any age.
On the 6 pin connector there are the track and the classic FL/RL (Out1/Out2) connections, which are 100 mA current capable power outputs. A great feature for power back up are the solder pads for direct connection of external capacitors (25Vdc capacitors are advised, it is not necessary to use higher voltage capacitors). On the opposite side there are 4 logical outputs, capable to drive directly 4 LEDs, without the need of series resistors. There are many light effects for the LEDs to choose from.
Also on the board are Vcc and GND connection pads. If the Train-O-Matic SPP or SPP-N (Powerpack) is used, it has to be connected to the Vcc and GND solder pads and one of the logical outputs must be sacrificed to control the power pack (Charge). The SPP control can be configured in the CVs.
The size of the decoder will allow the usage in N scale, for example with the Train-O-Matic Shine Plus Mini Digi light strips. And of course, the decoder has full RailCom capabilities. A version is available as RailCom transmitter, with only 2 wires connected to the rails
Makkelijk te verwerken.
Een perfecte function decoder. en met de tip van Arnaud de juiste beschrijving gedownloade en wat je dan allemaal kan instellen WAUW er ging een wereld voor mij open....HELEMAAL TOP!!
Decoder doet het prima maar... Er zijn geen AUX1 en AUX2 power uitgangen. Alleen AUX3-6 met low power. Waardoor deze niet alle functies in bv een piko stuurstand kunnen gebruiken welke een next 18 decoder gebruiken.
Mini en zeer leuk om in te bouwen in krappe ruimtes
Jammer dat er geen handleiding bij zit. En deze is ook niet beschikbaar op de website van de fabrikant. Daardoor is het lastig programmeren.
Goed en goedkoop.
Nog niet definitief ingebouwd maar de testen zijn veel belovend.
Prima produkt voor een mooie prijs.
Product carousel items