ZIMO MS450

PLEASE NOTE: Due to chip shortages, MS decoders are temporarily supplied with alternative chips. As a result, ZIMO is temporarily applying a surcharge! We have partially incorporated this in the sales price.

MS450
(predecessor: MX645)
Sound decoders with a PluX-22 interface usually are high-volume HO decoders: Regarding the MX decoders this was the MX645P22, with the MS decoders it is the MS450P22 which is based on the same PCB and can also be orderd with wires as MS450, MS450R and MS450F. MS decoders are equipped with a fully digital sound amplifier with 3 W, and also a connector for an external stay-alive capacitor – 16 V Elkos or 15 V Supercaps (without limitation to the maximum capacity), especially important for playing back sound without interruptions.

Connection diagrams can be found in the operating instructions Instructions for all MS decoders

	MS450, MS450R, MS450F	MS450P22
Dimensions (mm)	30 x 15 x 4	30 x 15 x 4
ConnectionsWires and/or standardized interfaces	13 wires, NEM-652, NEM-651	PluX-22

Total current (continuous): motor+sound+FOs(peak)	1.2 A(2.5 A)	1.2 A(2.5 A)

Motor current (continuous)(peak)	1.2 A(2.5 A)	1.2 A(2.5 A)
Current on Function OutputsTotal of the FOs	0.8 A	0.8 A
Function Outputs incl. 2 x headlights(+ logic-level outputs)	10 4 with wires, 6 on s.pads, (+2 logic-level)	10 9 on plug, 1 on s.pad, (+2 logic-level)

Servo control wires	2alternate use of logic-level	2alternate use of logic-level
(complete witch 5V supply)	(NO, external 5V)	(NO, external 5V)

SUSI - connection alternatively SUSI, I²C, sound loading	yesalternate use of logic-level on s.pads	yesalternate use of logic-level on PluX

Switch Inputs for cam sensors, Reed switches, i.a.	1on s.pad +2 alternate use of logic-level	1on PluX +2 alternate use of logic-level

Energy Storage connection	yes	yes
15V - capacitors DIRECTLY to the decoder	with wires	on PluX

Speaker Outputs	1	1
dep. on dec. 8 Ω or 4 Ω (2x8 Ω in parallel)	3 Watt / 4 Ω on wires	3 Watt / 4 Ω on PluX

Sound Flash	128 Mbit	128 Mbit

Locdecoders / Sound Decoder

Jan Legierse |

duidelijke info maar weet nog geen eind resultaat omdat die nog ingebouwd moet worden

Bart Cornet |

Jammer dat je de soundfile á €22,- er nog apart moet bijkopen en het programmeren kost ook nog €10,-. Al met al ben je dus zo’n € 160,- kwijt voor deze sound module en moet je de luidspreker er nog zelf aan solderen.

4 stars based on 2 reviews

Add your review

Shopping cart

MS450 Sounddecoder