€104,90

Product features and functions

For optional operation with conventional direct current driving device, digital systems according to SelecTRIX 1 and 2 or according to the NMRA standard (DCC)

The switchover between analogue and digital operation takes place automatically

The last programmed system is used in digital mode (it is not switched over automatically!)

SelecTRIX 1 31 speed steps, 100 addresses

SelecTRIX 2 127 speed steps, 10,000 addresses, 16 additional functions

DCC Short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps

The latest generation of load control, resulting in particularly smooth control behavior

Different control variants for optimal adaptation to the engine

Internal 127 speed steps

Adjustable motor frequency (low frequency, 16 kHz, 32 kHz)

Block section operation with simple diodes in digital operation

Light and function outputs can be dimmed and activated analogously

Maneuvering

Motor, light and track connections can be exchanged electronically

All function outputs freely programmable

Temperature protection

Original vehicle-specific steam, diesel and electric locomotive sound projects (no "standard sounds")

Realistic steam driving noise with wheel-synchronized and overlapping exhaust shocks, pitch dependent pitch and independent boiling sound

Realistic diesel-hydraulic driving noise with pitch-dependent pitch, variable idling speed and independent acceleration levels, turbocharger and dynamic brake

Realistic diesel-mechanical driving noise with multiple gears, idling, multiple driving and acceleration levels and possible switching noise

Realistic electric driving noise with driving motor and driving motor fan as well as upgrade noises (pantograph, main switch, etc.), rear derailleur noise and dynamic brake

Bell, horn, pipe, doors close etc. (depending on the sound project) can be triggered separately at any time

All sound sequences can be freely configured ("function mapping") and triggered at random

Speaker connection protected against short circuit and overload

Low heat development through the use of the latest technologies

Reset function for DCC and SX2

Update capability of the decoder

Loadability of sound projects via SUSI interface using a programmer

Vehicle sound decoder 1.0 A

Operating mode SX1, SX2, DCC, MM, DC analog

Dimensions [mm]

21.2 * 9.1 * 3.4

Total resilience

1.0 A

Max. Motor current

1.0 A

Max. Driving voltage

30 V

LV, LR (dimmable)

150 mA each

AUX1, AUX2 (dimmable)

300 mA each

AUX3, AUX4

unreinforced

AUX5, AUX6

unreinforced

with SUSI interface (if AUX3 / AUX4 deactivated)

sampling rate

22 kHz

resolution

16 bits

Independent sound channels

8th

Memory size

128 megabits

Storage period

up to 760 s

Max. Output power

2.6 / 1.6 W (4/8 Ω)

Categories

Doehler & Haass SD10A

Product description

Product description

Product features and functions

Accessoires

Login

Product description

Product description

Product features and functions

Share

Accessoires