The servodecoders can be connected to the servos known from RC model making and thus form the quiet and inexpensive basis for every drive. The servo drives that can be used by the model railroader set switches, signals and barriers at level crossings, move a water crane or open and close gates.
By means of the additional switching outputs, for example, frogs of points with a switching current of 7 A can be polarized.

With a simple button programming, the address, the end stops and the rotation speed for each servo can be set separately with Motorola and DCC control units. When using a DCC control panel, such as. For example, the Intellibox, you can set all parameters via CV programming. So the address and the end stops can be set.